A1 Wire Splice Heat Shrink Tube | ||||
Features | ||||
Flame retardant (Black only) | Operating temperature: -40~135 ℃ | |||
High shrink ratio (4:1) | Shrink temperature: 135 ℃ | |||
Semi-rigid polyolefin outer layer | RoHS compliant | |||
Polyamide adhesive liner | Voltage Class:600 V | |||
Technical Data | ||||
Property | Test method | Values | ||
Black Clear | ||||
Physical | Tensile strength | ASTM D2671 | ≥14 MPa | ≥12 MPa |
Breakdown elongation | ASTM D2671 | ≥400% | ||
Aging | Tensile strength | ASTM D2671 | ≥14 MPa | ≥12 MPa |
Breakdown elongation | ASTM D2671 | ≥350% | ||
Outer layer density | ASTM D792 | 1.25 | 1.00 | |
Water absorption | ASTM D570 | ≤0.5% | ||
Heat shock (200℃/4hrs) | ASTM D2671 | No drop, No flow | ||
Low temperature flexibility | ASTM D2671 | -40℃/4hrs ,no cracking | ||
Ring-ball soft point(adhesive liner) | ASTM E28 | 120℃±5℃ | ||
Electrical | Volume resistivity | ASTM D2671 | ≥1014 Ω.cm | |
Dielectric strength | ASTM D2671 | ≥16KV/mm | ||
Chemical | Flammability | UL224 | self-extinguish in 30s |
Dimensions | ||||
Reference | As supplied(mm) | After recovered(mm) | Standard length | |
UPM A1 | ID min. | ID max. | WT nom. | m/spool |
5.7/1.3 | 5.7 | 1.3 | 1.2 | 100 |
7.4/1.7 | 7.4 | 1.7 | 1.4 | 100 |
10.8/2.5 | 10.8 | 2.5 | 2.0 | 100 |
17.8/4.4 | 17.8 | 4.4 | 2.3 | 50 |
ID=Internal Diameter | WT=wall thickness | |||
Typical application | ||||
Ideal for wire to metal splices and wire to wire joints in automotive industry | ||||
Clear tubing is specially designed for sealing and insulation of components | ||||
where see-through inspection is required | ||||
Ordering | ||||
Standard color : Black ,Clear | ||||
Standard packaging on spools. | ||||
Please specify specification, color, quantity when ordering | ||||
Cross reference | ||||
Raychem/Tyco : ES1000/ES2000 |